Outgoing
This section describes steps to create policies for packets and services from the LAN network
to the WAN 1/2 network.
Entering the Outgoing window:
Click Policy on the left hand side menu bar, then click Outgoing under it. A window
will appear with a table displaying currently defined Outgoing policies.
The fields in the Outgoing window are:
Source: source network addresses that are specified in the LAN section of Address
menu, or all the LAN network addresses.
Destination: destination network addresses that are specified in the WAN section of
the Address menu, or all of the WAN network addresses.
Service: specify services provided by WAN network servers.
- 230 -