Table of Contents
Advertisement
For Dynamic IP Address (Cable Modem User): This option is for users who are
automatically assigned an IP address by their ISP, such as cable modem users. The
following fields apply:
IP Address: The dynamic IP address obtained by the Multi-Homing Gateway from the
ISP will be displayed here. This is the IP address of the WAN 1 (WAN) port of the
device.
MAC Address: This is the MAC Address of the device.
Hostname: This will be the name assign to the device. Some cable modem ISP
assign a specific hostname in order to connect to their network. Please enter the
hostname here. If not required by your ISP, you do not have to enter a hostname.
Ping: Select this to allow the WAN 1 network to ping the IP Address of the
Multi-Homing Gateway. This will allow people from the Internet to be able to ping the
Multi-Homing Gateway. If set to enable, the device will respond to echo request
packets from the WAN 1 network.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
Http: Select this to allow the device WEBUI to be accessed from the WAN 1 network.
This will allow the WebUI to be configured from a user on the Internet. Keep in mind
that the device always requires a username and password to enter the WebUI.
- 62 -
Advertisement
Table of Contents
