DMZ To WAN & DMZ To LAN
This section describes steps to create policies for packets and services from DMZ networks to
WAN (WAN) networks.
networks.
Entering the DMZ To WAN window:
Click DMZ To WAN under Policy menu and the DMZ To WAN table appears displaying
currently defined DMZ To WAN policies.
The fields in the DMZ To WAN window are:
Source: source network addresses which are specified in the DMZ section of the
Address window.
Destination: destination networks, which is the WAN network address
Service: services supported by Servers of WAN networks.
Please follow the same procedures for DMZ networks to LAN
- 251 -