Adding An Incoming Policy - LevelOne FBR-2000 User Manual

Adding an Incoming Policy

Step 1: Under Incoming of the Policy menu, click the New Entry button.
Step 2:
Source Address: Select names of the WAN networks from the drop down list. The drop
down list contains the names of all WAN networks defined in the WAN section of the Address
menu. To create a new source address, please go to the LAN section under the Address
menu.
Destination Address: Select names of the LAN networks from the drop down list. The drop
down list contains the names of IP mapping addresses specified in the Mapped IP or the
Virtual Server sections of Virtual Server menu. To create a new destination address,
please go to the Virtual Server menu.
- 241 -