Table of Contents
Advertisement
WAB–2000 Wireless Access Point
Wireless Access Point Configuration
General
Wireless Setup allows your computer's PC Card to communicate with
the access point. Follow the manufacturer's instructions to set up the PC
Card on each wireless device that will be part of the WLAN.
The Wireless Access Point — General screen lists the MAC Address of
the AP card. This is not the MAC Address that will be used for the BS-
SID for bridging setup, however. That is found on the Wireless Bridge
— General screen.
If you will be using an SSID for a wireless LAN, enter it here and in
the setup of each wireless client. This nomenclature has to be set on the
access point and each wireless device in order for them to communicate.
29000156-001 A
Chapter 3: Access Point Configuration
27
Advertisement
Table of Contents
