WAB–2000 Wireless Access Point
Advanced
The Wireless Access Point — Advanced screen allows you to enable
or disable load balancing and to control bandwidth.
Load balancing is enabled by default. The load balancing feature bal-
ances the wireless clients between APs. If two APs with similar settings
are in a conference room, depending on the location of the APs, all wire-
less clients could potentially associate with the same AP, leaving the other
AP unused. Load balancing attempts to evenly distribute the wireless
clients on both APs.
Once you have made any changes, click Apply to save.
Wireless Bridge
The Wireless Bridge screens are described in Chapter 4.
36
Chapter 3: Access Point Configuration
29000156-001 A