Table of Contents
Advertisement
WAB–2000 Wireless Access Point
Point-to-Point Bridging Setup Guide - Manual Mode
Direction
Wireless Bridge — General (Manual Bridging Mode)
Wirelss Mode
Tx Rate
Channel No.
Tx Power
Propagation Distance
Bridging Mode
Signal Strength LED MAC
Spanning Tree Protocol (STP)
BSSID
Wireless Bridge — Encryption
Bridging encryption options
Point-to-Point Bridging Setup Guide - Auto Mode
Direction
Wireless Bridge — Genral (Auto Bridging Mode)
Wirelss Mode
Tx Rate
Channel No.
Tx Power Mode
Propagation Distance
Bridging Mode
SSID
Max Auto Bridges
Bridge Priority
Signal Strength MAC
Wireless Bridge — Encryption
Bridging encryption options
Wireless Bridge — MAC Address Filtering
MAC Address Filtering options
29000156-001 A
Chapter 4: Wireless Bridge Configuration
Bridge 1
802.11a
AUTO
Must be the same as
Bridge 2
Auto
< 5 Miles
manual briding se-
lected
Not Assigned (select
from drop-down list)
Enable (or Disable if
no bridging loop pos-
sible)
Add Bridge 2 MAC
Select appropriate
key type/length and
value. Must be the
same key as Bridge 2.
Bridge 1
802.11a
AUTO
Must be the same as
Bridge 2
Auto
< 5 Miles
Auto bridging selected Auto bridging selected
Must be the same as
Bridge 2
40 (range 1-40)
40 (range 1-40)
Enter from list at the
bottom of the screen
Select appropriate
key type/length and
value. Must be same
as Bridge 2.
Select Filter Type: in-
put MAC addresses
Bridge 2
802.11a
AUTO
Must be the same as Bridge
1
Auto
< 5 Miles
manual bridging selected
Not Assigned (select from
drop-down list)
Enable (or Disable if no
bridging loop possible)
Add Bridge 1 MAC
Select appropriate key
type/length and value.
Must be the same key as
Bridge 1.
Bridge 2
802.11a
AUTO
Must be the same as Bridge
1
Auto
< 5 Miles
Must be the same as Bridge
1
40 (range 1-40)
40 (range 1-40)
Enter from list at the bot-
tom of the screen
Select appropriate key
type/length and value.
Must be same as Bridge 1.
Select Filter Type: input
MAC addresses
61
Advertisement
Table of Contents
