Table of Contents
Advertisement
WAB–2000 Wireless Access Point
Monitoring
In the upper right-hand corner of the Wireless Bridge — General
screen there is a button called Monitoring. f you click on this button, a
pop-up window will appear (WDS Information). If you select Enable ref-
esh, you can set the bridge refresh interval from 5 seconds to 30 minutes.
Refreshing the screen allows you to see the effect of aiming the antenna to
improve signal strength.
Wireless Bridge — Encryption
The Wireless Bridge — Encryption screen is used to configure static
encryption keys for the wireless bridge. This is an important page to set
up to ensure that your bridge is working correctly. The encryption key
that you use on this screen must be the same for any bridge connected
to your bridging network in order for communication to occur. On this
screen you can select None or Static AES (128-bit).
58
Chapter 4: Wireless Bridge Configuration
29000156-001 A
Advertisement
Table of Contents
