Getting Start With Access Point; Know The 11G Wireless Network Access Point; Connect To The 11G Wireless Network Access Point - LevelOne WAP-0004 User Manual

2. Getting Start with Access Point

2.1 Know the 11g Wireless Network Access Point

Ports:
● Power Receptor
● Reset Button
● RJ-45 Ethernet Port
Cross-over cable is required to connect to computer directly
LEDs:
● Power LED: ON when the unit is powered up
● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
● WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.

2.2 Connect to the 11g Wireless Network Access Point

Build the Infrastructure Mode
In order to setup an Infrastructure of a wireless network such as the example
shown above, user will need the following:
1. A broadband Internet connection.
6