Table of Contents
Advertisement
WAB–2000 Wireless Access Point
The bridge antenna port is located on the front of the WAB–2000. To
obtain the best performance, the bridge antenna should be placed away
from the AP antennas. Use a 1.5 meter low loss antenna cable to connect
a directional antenna to the WAB–2000. The maximum gain for the direc-
tional antenna should be 14 dBi.
Mounting Kit Setup
To mount the WAB–2000 outdoors, you should choose a suitable
post to mount the unit high in the air. Use the U-ring, screws and nuts to
attach the mounting plate to the post. Next attach the WAB–2000 to the
mounting plate with screws.
The Indicator Lights
The top panel of the WAB–2000 contains a set of indicator lights (Light
Emitting Diodes or LEDs) that help describe the state of various network-
ing and connection operations.
Power WAN WLAN
18
WLAN
WLAN
SS
1
2
Chapter 2: Hardware Installation
29000155-001 A
Advertisement
Table of Contents
