Gxv3501/Gxv3504 Smtp; Gxv3501/Gxv3504 Ftp - Grandstream Networks GXV3501 User Manual

GXV3501/GXV3504 Digital Video Server
GXV3501/GXV3504 SMTP Page
The SMTP server is used to send out emails when an alarm event or motion detection is triggered.
The SMTP settings must be configured to make sure the alarm email is sent out properly.
SMTP Server Settings
Enable SMTP – The default setting is "No." If
you want the GXV3501/GXV3504 to send out
emails with the image capture when an alarm
is triggered, set this field to "Yes."
SMTP Server – The IP or hostname of the
SMTP server, for example, smtp.gmail.com.
Port – The port of the SMTP server. The
GXV3501/GXV3504 supports port 25 and
SSL port 465, which is for SMTP with an
encrypted connection.
From E-Mail Address – The email address
that sends out the alarm email(s).
To E-Mail Address – The email addresses that the alarm email(s) will be sent to. You can have up to
3 emails configured.
This server requires a secure connection (SSL) – Set this field to Yes if the SMTP server requires a
secure connection.
User Name/ Password – The user name and password required to log in to your SMTP server, for
example, 123@gmail.com/123.
Test Email Account Settings – Click the Test button to send a test email from the From E-Mail to
the To E-Mail to make sure that SMTP is configured properly. If the receiver can get the test email,
then the SMTP settings are ready to go.
GXV3501/GXV3504 FTP Page
The FTP server is used to store video files if you configure the GXV3501/GXV3504 to record video
and upload it to the FTP server when an alarm event or
motion detection is triggered.
FTP Settings
Enable FTP – The default setting is "No," if you want the
GXV3501/GXV3504 to upload the recorded video to the
FTP server when an alarm is triggered, set this field to "Yes."
FTP Server – The IP address or hostname of the SMTP
server, ie. ftp.myserver.com.
Port – The port that your FTP server is using.
Firmware 1.0.1.18 Page 21 of 31
Grandstream Networks, Inc. 08/2009