General Characteristics - Cembre HT-TC051Y Operation And Maintenance Manual

• Wear eye protection. Metal chips can fly from blades when cutting.
• Do not cut short, free pieces of steel reinforced cables (ACSR) as they may fly off
dangerously, causing injury to the operator or persons nearby.
• Inspect the blades before each use. Do not use damaged blades.
• Damaged blades can break and cause injury or damage to the tool.
• Work in a clean, uncluttered area. Keep persons away from immediate work area.
• Use this cutting tool for the manufacturer's intended purpose only.
• Do not cut live cables or conductors.

1. GENERAL CHARACTERISTICS

– Application range: suitable for cutting copper, aluminium, aluminium steel reinforced
cables (ACSR) having a max ø of ............................................... 50 mm (2 in.)
– Rated operating pressure: ........................................................ 700 bar (10,000 psi)
– Dimensions: length .................................................................... 503 mm (19.8 in.)
– Weight: ........................................................................................ 4,7 kg
– Oil: ............................................................. AGIP ARNICA 32
– Advancing speed: the tool automatically switches from a fast advancing speed of
blades to a slower cutting speed.
– Safety: the tool is provided with max pressure valve; MPC1 special manometer, is
available upon request to check the proper setting of the valve.
2. INSTRUCTIONS FOR USE
2.1) Setting
Insert the cable between the blades at the desired cutting point.
For a running cable, press latch (28) and open the upper blade assembly.
Warning: the opening of upper blade assembly must be done when the tool is in
rest position, with the lower blade (18) completely retracted.
With the cable on the lower blade (18), close the upper blade assembly and secure the
latch (28).
29 2
HYDRAULIC CUTTING TOOL
HT-TC051Y

WARNING
width ..................................................................... 129 mm (5.1 in.)
SHELL TELLUS TX 32
(Ref. to Fig. 1)
ENGLISH
(10.3 lbs)
or
or equivalent