Table of Contents
Advertisement
1. GENERAL CHARACTERISTICS
Application range
Max. cutting diameter
Operating pressure
Dimensions
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
(1)
Acoustic noise
L
pA
L
pCPeak
L
WA
Vibration
(2)
Battery charger
Input
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L
= weighted continuous acoustic pressure level equivalent.
pA
L
= maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L
= acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard and under
operating conditions much more severe than those normally found.
5
B-TC550A
suitable for cutting Copper, Aluminium, ACSR and Steel
mm (inches)
bar (psi)
441 x 424 x 87
mm (inches)
(17.5 x 16.7 x 3.4)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from
a rapid advancing speed of the ram to a slower, more
type
V / Ah (Wh)
18 / 4.0 / (72)
kg (lbs)
dB (A)
dB (C)
dB (A)
2
m/s
type
V / Hz
conductors, ropes and rods
55 (2-3/16")
880 (12,700)
8,9 (19.6)
18
-15 to +50 (+5 to +122)
ENI ARNICA ISO 32 or equivalents
powerful speed
maximum pressure valve
CB1840L
0,66 (1.45)
73
94.5
79
0.575 max.
ASC30-36
115 / 60
B-TC550NA
441 x 444 x 87
(17.5 x 17.5 x 3.4)
9,0 (19.9)
MAKITA BL1850B
18 / 5.0 (90)
0,6 (1.3)
MAKITA DC18RC
120 / 50 - 60
Advertisement
Table of Contents
