Table of Contents
Advertisement
1. GENERAL CHARACTERISTICS
Application range
Max. cutting diameter
Operating pressure
Dimensions (Fig. 9 and fi g.
10 page 10)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Acoustic noise
(1)
L
pA
L
pCPeak
L
WA
(2)
Vibration
Battery charger
Input
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L
= weighted continuous acoustic pressure level equivalent.
pA
L
= maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L
= acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard and under
operating conditions much more severe than those normally found.
5
B-TC650A
mm (inches)
bar (psi)
429 x 415 x 83
mm (inches)
(16.9 x 16.3 x 3.3)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from
a rapid advancing speed of the ram to a slower, more
type
V / Ah (Wh)
18 / 4.0 / (72)
kg (lbs)
dB (A)
dB (C)
dB (A)
2
m/s
type
V / Hz
suitable for cutting Copper, Aluminium
or telephone cables
65 (2-9/16")
700 (10,000)
6,4 (14.1)
18
-15 to +50 (+5 to +122)
ENI ARNICA ISO 32 or equivalents
powerful speed
maximum pressure valve
CB1840L
0,66 (1.45)
73
94.5
79
0.575 max.
ASC30-36
115 / 60
B-TC650NA
429 x 435 x 83
(16.9 x 17.1 x 3.3)
6,5 (14.4)
MAKITA BL1850B
18 / 5.0 (90)
0,6 (1.3)
MAKITA DC18RC
120 / 50 - 60
Advertisement
Table of Contents
