Table of Contents
Advertisement
previous dial-up disconnection occurs.
Manual dial-up: Users may click related bLeveloneons below the "Line connection
information list" of the Network parameters —>WAN configuration to manually
connect and hang up.
On-demand dialing: The device will connect automatically when there is Internet traffic
in the Intranet.
Dial-up mode: Selects the PPPoE dial-up mode, which is normal mode by default. If the
dial-up is not successful, try using other modes on the premise of using the correct user name
and password.
Idle time: The time length after there is no traffic of access and before automatic
disconnection, 0 means no automatic disconnection (Unit: minutes).
MTU: Maximum transmission unit, whose default value is 1480 bytes. The device will
automatically negotiate with the peer device. Do not modify it unless in special applications.
For the working mode in the advanced options, MAC address, interface mode, please refer to
the configuration of dynamic access.
6.1.2
Internet Connection List
In the " Internet Connection List ", you can view the configuration and status information for the
lines, as shown in Figure 6_4, Figure 6_5.
http://www.level1.com
Figure 6_4 Internet Connection List
Chapter 6 Network parameters
Page 22
Advertisement
Table of Contents
