Set Up The Network Connection - LevelOne GEU-2429 Manual

5 Set up the network connection

Connect the device to Switch
Connection Guide:
When switches connected to the base 10 Tx equipment use class 3 or 5 line twisted-pair, sup-
er line 5 class twisted-pair (pin definition refer to cable).
Connecting cable length should follow the IEEE specification is less than 100 meters (328 ft), because
the switches support MDI/MDIX automatic polarity, you can use ordinary straight lines to connect the
workstation, or another switch/hub.
GEU-2429 24-Port Gigabit Ethernet Switch
8