Table of Contents
Advertisement
196 Chapter 3 Using the console interface
You can configure up to 48 MAC SA-based VLANs. Up to 48 MAC addresses can
be used with the existing MAC SA-based VLANs. Due to hardware limitations, it
is possible that some MAC address cannot be entered, depended on the values of
MAC addresses previously entered.
When you create VLANs, you can assign various ports (and therefore the devices
attached to these ports) to different broadcast domains. Creating VLANs increases
network flexibility by allowing you to reassign devices to accommodate network
moves, additions, and changes, eliminating the need to change physical cabling.
To open the VLAN Configuration Menu:
➨
Choose VLAN Configuration (or press v) from the Switch Configuration
Menu screen.
Figure 67 VLAN Configuration Menu screen
Use arrow keys to highlight option, press <Return> or <Enter> to select
option.
Press Ctrl-R to return to previous menu.
Main Menu.
208700-C
Note: Refer to Chapters 1 and 2 for detailed information about
configuring VLANs.
VLAN Configuration Menu
VLAN Configuration...
MAC Addresses for MAC-SA Based VLAN...
VLAN Port Configuration...
VLAN Display by Port...
Return to Switch Configuration Menu
Press Ctrl-C to return to
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
