Figure 5 Removing The Cascade Module Filler Panel - Nortel business policy switch 2000 User Manual

47
You can connect up to eight switches into a redundant stack configuration.
Installation instructions are provided with each BayStack 400-ST1 Cascade
Module (see Installing the BayStack 400-ST1 Cascade Module). Use a flathead
screwdriver to remove the filler panel that covers the Cascade Module slot
(Figure 5).
For more information about cascade modules, see Installing the Cascade 400-ST1
Cascade Module. See your Nortel Networks sales representative for cascade
module ordering information.

Figure 5 Removing the cascade module filler panel

9744FA
Using the Business Policy Switch 2000 Version 2.0