Spanning Tree Group Configuration Screen - Nortel business policy switch 2000 User Manual

250 Chapter 3 Using the console interface

Spanning Tree Group Configuration screen

The Spanning Tree Group Configuration screen allows you to create and
configure spanning tree groups (STGs).
Multiple STGs, up to 8, are available with software version 1.2 and higher. The
STGs are available only in Pure BPS 2000 Stack mode. In Hybrid Stack mode,
you have only 1 STG, which is the default STG1. Beginning with software version
2.0, you can configure the VLAN for tagged BPDUs.
To open the Spanning Tree Group Configuration screen:
➨
Choose Spanning Tree Group Configuration (or press g) from the Spanning
Tree Configuration Menu screen.
Figure 91
208700-C
Note: Because multiple STGs are available only in Pure BPS 2000
Stack mode, the first and fourth menu items do not appear when you
work in Hybrid Stack, or mixed stack, mode.
Note: When you change the Stack Operational Mode from Pure BPS
2000 Stack mode to Hybrid Stack mode, you lose all STGs above 1 (the
default STG).
shows the Spanning Tree Group Configuration screen.