Figure 74 High Speed Flow Control Configuration; Table 30 High Speed Flow Control Configuration Screen Fields - Nortel business policy switch 2000 User Manual

Figure 74 High Speed Flow Control Configuration

Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Table 30

Table 30 High Speed Flow Control Configuration Screen Fields

Field
Unit
Autonegotiation
High Speed Flow Control Configuration
Unit:
Autonegotiation:
Flow Control:
Preferred Phy:
Active Phy:
describes the High Speed Flow Control Configuration screen fields.
Description
Allows you to select the unit number (when stacking is configured) to view or
configure. To view or configure another unit, type its unit number and press
[Enter], or press the spacebar to toggle the unit numbers (the system only
displays a screen for units that are configured with a Gigabit MDA).
When enabled, the port only advertises support for 1000 Mb/s operation, in
full-duplex mode.
NOTE: This field is disabled for all fiber optic ports. Autonegotiation cannot be
disabled with the ports on the BPS2000-1GT and BPS2000-2GT.
Default Value Enabled
Range Enabled, Disabled
Chapter 3 Using the console interface 213
[ 1 ]
[ Enabled ]
Disabled
[ Right ]
Right
Press Ctrl-C to return to Main Menu.
Using the Business Policy Switch 2000 Version 2.0