Fujitsu PRIMERGY Econel 50 Service Supplement Manual page 79

SATA Hard Disk Drives Installing SATA Hard Disk Drive
1
2
a
a
Figure 13: Mounting the cover
Ê Hook the guide tabs (a) of the cover into the recesses (1).
Ê Fold the cover. Ensure that no power cable or SATA cables become pinched.
Ê Fasten the cover with the screw (2).
Ê Close the server, connect it to the mains, and switch it ON as described in
chapter "Completion" on page 31 and following.
Proceed in the reverse order for removal.
Options Guide 25
U41599-J-Z156-1-76