Fujitsu PRIMERGY Econel 50 Service Supplement Manual page 6

Overview of the Documentation
Information/procedure
Detailed safety notes
Features and technical data of the server
Installation and operation, among other things:
– Operation
– Configuration of the server
Troubleshooting
Information about the system board:
– Features of the system board
– External ports on the server
– Pin assignment of the connectors
– Jumper settings
– LED indicators
– Replacing the battery
Extensions and upgrades:
– Extending/replacing the main memory
– Installing the processor/replacing the
processor/replacing the heat sink
I
For some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Installing accessible drives
– Removing/installing the system fan
– Installing SATA hard disk drives
– Installing controllers in PCI slots
Replacement routines:
– Replacing the operating panel cable
– Replacing the floppy disk drive
– Replacing the USB cable (front)
– Replacing the power supply unit
– Replacing the intrusion switch
– Replacing the system board
BIOS setup
Table 1: Overview of the Documentation Econel 50
2 Service Supplement
Introduction
Manual
Safety
Operating Manual
Technical Manual
Technical Manual
Options Guide
Service Supplement
BIOS Setup
Econel 50