Fujitsu PRIMERGY Econel 50 Service Supplement Manual page 15

Modules with electrostatic-sensitive components:
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plug from the power socket before inserting or removing
components containing ESDs.
You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
The equipment and tools you use must be free of static charges.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
Only touch the components at the positions highlighted in green (touch
point).
Do not touch any exposed pins or conductors on a component.
Place all components on a static-safe base.
I
You will find a detailed description for handling ESD components in the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
Econel 50
Service Supplement
Safety
11