Fujitsu PRIMERGY Econel 50 Service Supplement Manual page 41

Replacement Routines
Ê Reconnect all cables to the system board (see cabling in the appendix and
D1859 sticker).
Ê Insert all controller in the relevant slots and reconnect the cables (for
description see Options Guide).
Ê Swing the power supply back, re-mount the cross-beam and the system fan,
and return the server to its original installation location.
Ê Close the server (for a detailed description see the Options Guide) and
reconnect the power plug.
Ê Connect all external cables.
V
CAUTION!
After installing the new system board, it is necessary to update the BIOS
to ensure proper operation (for description see the BIOS Manual).
Econel 50
Service Supplement
Replacing the System Board
37