Advertisement
Signamax Connectivity System
Chapter 3.
Installation
I. DC input & external power adapter
The external power supply adapter specification:
AC input range from 90VAC to 260VAC.
AC frequency range from 47Hz to 63Hz, TUV, CE, UL
Safety.
Power adapter DC output is +5VDC 1.5A
The device DC input +5VDC 1A.
II. The TP port
The device TP port support Auto-MDIX, Auto-negotiation
and Flow control functions. The cable length up to 100
meters for shielded/unshielded twisted pair cable. Allow
users connect the converter to 10BASE-T and
100BASE-TX devices.
III. The Fiber port
The converter provided different types of fiber connectors
such as SC, ST, MT-RJ and LC for multi-mode or
single-mode fiber cables.
Full-Duplex or Half-Duplex operation on fiber port
The converter provided slide switch at right side of
converter. The purpose of the slide switch is for fiber
full-duplex or half-duplex operation. The factory default is
full duplex as below chart.
______________________________________________ 065-1176
WWW.SIGNAMAX-US.COM
WWW.SIGNAMAX-CE.COM
Advertisement
