Button Description - Globalsat TR-102 User Manual

TR-10

5.2 Button description

Power button
SOS button
Answer / Hang up
Quick dial 1 / Volume up
Quick dial 2 / Mute the
microphone
Quick dial 3 / Volume
down
GSM LED
GPS LED
Power LED
Power adapter jack
Mini USB connector
Button Lock
Turn on / Turn off: Please see 7.1 for details.
You can assign up to 3 sets of phone numbers to the SOS button. When this button is pressed, TR-102 will send
its location information to these 3 sets of phone numbers by SMS.
TR-102 will first call the SOS number 1 and send the location information by SMS. Following, TR-102 will repeat
the same procedure to SOS number 2 and 3.
When there is an incoming call, press this button to answer the incoming call. While in talking, press it will hang
up the phone.
You can set a phone number for this button; when this button is pressed, TR-102 will dial the preset number.
While in talking, you can press this button to increase the volume.
You can set a phone number for this button; when this button is pressed, TR-102 will dial the preset number.
While in talking, the other party will not hear from you if this button is pressed to mute the microphone; press it
again to enable the microphone.
You can set a phone number for this button; when this button is pressed, TR-102 will dial the preset number.
While in talking, you can press this button to decrease the volume.
LED is on: TR-102 is turned on, but not connected to GSM network yet.
Blinking quickly (once per second): TR-102 is in dialing or talking mode.
Blinking slowly (once per 3 seconds): TR-102 is in the standby mode.
The LED will be blinking when TR-102 is fixing its location. More details please see
Page 27
for GPRS mode.
The LED will be orange when AC adapter is plugged for charging the battery. If the battery power is low, this LED
will be on in red.
Plug in the Power adapter to TR-102's power adapter jack for battery charging.
Connecting TR-102 to PC by a Mini USB cable, you can setup all its features and functions from application
software in PC.
Switch to lock all the buttons for the purpose of preventing buttons from been accidentally touched. (Only the
power button is not lockable. When Button Lock is on, the LED indicators will flash 3 times if any other button is
pressed.)
10
Page 21
for SOS button and