Turn On/Off The Device; Button Description - Globalsat TR-151A User Manual

Vehicle/asset tracker

Hide thumbs Also See for TR-151A:

Table of Contents

2.5 Turn on/off the device

●

Turn on: After installing the battery, the status LED will emit red light. After the LED go out,

please wait for 5 seconds before turning on the power. Press the power button for 3~4

seconds. When the device is turned on, GPS will do cold start to get fixed its position for

the first time with the green GPS LED on. If location is fixed, the LED will blink. It is

suggested that you stay at outdoor places or near the window where TR-151 can receive

the better GPS signal when you turn on the device.

NOTICE: If it does not successfully get the location fixed after turning the power on,

TR-151 may be located in the weak signal area or on the move.

●

Turn off: Press the Power button for 3~4 seconds. When the power is turned off, LED will

go out.

TR-151

page 13

Table of Contents

Tr-151e