Operating The Device; Turn On / Turn Off; Answer / Hand Up The Phone - Globalsat TR-102 User Manual

Hide thumbs Also See for TR-102:

Table of Contents

. Operating the device

● Turn on: When the device is off, press the Power button for 3 seconds,

three LEDs will start to flash quickly from top to bottom. It will enter the

standby mode with blue LED flash slowly after the startup process is

finished. (During the startup process, it can not be turned off.) When the

device is on, GPS will start to locate its position with the green GPS LED

flashing. If location is fixed, the LED will be on for a few seconds and

then goes out. If the location is not fixed in 3 minutes, the GPS function

goes sleep mode for 30 minutes before its next trial. It is suggested that

you be a outer place where it can receive the better GPS signal when

you turn on the device.

● Turn off: When the device is on, press the Power button for 3 seconds,

three LEDs will start to flash slowly from bottom to top. When the LEDs

go out, it indicates that the device is turned off for sure.

● When there is an incoming call, press this button to answer the

incoming call.

● While in talking, press it will hang up the phone.

TR-10

Table of Contents