Button Description - Globalsat TR-102 User Manual

TR-102

2.5 Button description

Power button Turn on / Turn off: Please see page 11 for details.
SOS button You can assign up to 3 sets of phone numbers to the
SOS button. When this button is pressed, TR-102 will
send its location information to these 3 sets of phone
numbers by SMS.
Answer / When there is an incoming call, you can answer the call
Hang up by pressing this button. During the phone call, press it
will hang up the phone.
Quick dial 1 / You can assign a phone number for this button; when
Volume up this button is pressed, TR-102 will dial the preset
number. During the phone call, you can increase the
volume by pressing this button.
Quick dial 2 / You can assign a phone number for this button; when
Mute the this button is pressed, TR-102 will dial the preset
microphone number. During the phone call, the other party will not
hear from you if this button is pressed to mute the
microphone; press it again to enable the microphone.
Quick dial 3 / You can assign a phone number for this button; when
Volume down this button is pressed, TR-102 will dial the preset
number. During the phone call, you can decrease the
volume by pressing this button.
GSM LED LED is on: TR-102 is turned on, but not connected to
GSM network yet.
Blinking quickly (once per second): TR-102 is in
dialing or talking mode.
Blinking slowly (once per 3 seconds): TR-102 is in the
standby mode.
GPS LED The LED will blink when TR-102 is fixing its location.
More details please see page 12 for SOS button and
page 46 for GPRS mode.
Power LED The LED will turn orange when AC adapter is plugged
for charging the battery. If the battery power is low, this
LED will be on in red, and TR-102 will send a warning
SMS to SOS number.
Power adapter Plug in the Power adapter to TR-102's power adapter
jack jack for battery charging.
Mini USB Connecting TR-102 to PC by a Mini USB cable, you can
connector setup all its features and functions from application
page 9