Table of Contents
Advertisement
5
Removal and replacement
procedures
CAUTION:
service provider. Accessing these components can damage the tablet or void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for the tablet/keyboard, go to http://partsurfer.hp.com, select the country or region,
and then follow the on-screen instructions.
There are as many as 13 screws that must be removed, replaced, and/or loosened when servicing
the tablet. Make special note of each screw size and location during removal and replacement.
Top and bottom covers
NOTE:
The top and bottom covers are included in the Cover Kit, spare part number 775650-001.
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
Remove the top and bottom covers:
CAUTION:
is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in
damage to the display panel.
1.
Position the tablet with the display panel facing down and the USB power connector toward you.
2.
Release the outside edges of the top and bottom covers (1) from the display panel assembly and
swing them up and to the inside.
Tablet components described in this chapter should only be accessed by an authorized
Before positioning the tablet with display panel facing down, make sure the work surface
Top and bottom covers
15
Advertisement
Table of Contents
