Battery - HP SLATE 8 PLUS Maintenance And Service Manual

9. Remove the display panel assembly (5).
Reverse this procedure to install the display panel assembly.

Battery

Description
Battery, 1-cell, 4800-mAh, lithium-polymer, USB-charging (includes cable and double-sided
adhesive)
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the top and bottom covers (see
5.
Remove the display panel assembly (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
information. To prevent loss of information, save your work or shut down the tablet through
the operating system before removing the battery.
18 Chapter 5 Removal and replacement procedures
To reduce potential safety issues, use only the battery provided with the tablet, a
Removing a battery that is the sole power source for the tablet can cause loss of
Top and bottom covers on page
Display panel assembly on page
Spare part number
775643-001
15).
16).