User Manual of Network Video Recorder
17.2 Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu >
Configuration > General interface.
Steps:
1. Enter the General Settings interface.
Menu >Configuration> General
2. Select the General tab.
3. Configure the following settings:
•
Language: The default language used is English.
•
Output Standard: Select the output standard to NTSC or PAL, which must be the same with the video
input standard.
•
VGA/HDMI Resolution: Select the VGA/HDMI output resolution, which must be the same with the
resolution of the monitor screen.
•
Time Zone: Select the time zone.
•
Date Format: Select the date format.
•
System Date: Select the system date.
•
System Time: Select the system time.
•
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
•
Enable Wizard: Enable/disable the Wizard when the device starts up.
•
Enable Password: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.
Figure 17. 2 General Settings Interface
243