One-Touch Configuration - HIKVISION DS-9608NI-ST User Manual

User Manual of Network Video Recorder

12.1.1 One-touch Configuration

Purpose:
Through one-touch configuration, you can quickly create the disk array and virtual disk. By default, the array type
to be created is RAID 5.
Steps:
1. Enter the Physical Disk Settings interface.
Menu > HDD > RAID > Physical Disk
2. Click One-touch Configuration button to enter the One-touch Array Configuration interface.
As the default array type is RAID 5, at least 3 HDDs must be installed in you device.
3. Edit the array name in the Array Name text filed and click OK button to start configuring array.
If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set by default. It is
recommended to set hot spare disk for automatically rebuilding the array when the array is abnormal.
4. When the array configuration is completed, click OK button in the pop-up message box to finish the settings.
Figure 12. 2 Physical Disk Settings Interface
Figure 12. 3 One-touch Array Configuration
185