Playing Back By Tag - HIKVISION DS-9608NI-ST User Manual

User Manual of Network Video Recorder
4. Select the minor type of VCA from the drop-down list.
For configuring the VCA recording, please refer to Chapter 5.4 Configuring VCA Event Recording and
Capture.
5. Select the camera (s) for searching, and set the Start time and End time.
6. Click Search button to get the search result information. You may refer to the right-side bar for the result.
7. Click button to play back the file.
Pre-play and post-play can be configured.
8. Playback interface.
The toolbar in the bottom part of Playback interface can be used to control playing process.
You can click or button to select the previous or next event. Please refer to Table 6.1 for the description
of buttons on the toolbar.

6.1.4 Playing Back by Tag

Purpose:
Video tag allows you to record related information like people and location of a certain time point during playback.
You can use video tag(s) to search for record files and position time point.
Before playing back by tag:
1. Enter Playback interface.
Menu>Playback
2. Search and play back the record file(s). Refer to Chapter 6.1.1 for the detailed information about searching
and playback of the record files.
Figure 6. 7 Interface of Playback by Event
98