Mcgp Configuration - D-Link DPH-80 User Manual

Hide thumbs Also See for DPH-80:

Table of Contents

Production Key: This is the key sequence the user should dial on the phone to get to

production-test mode. After entering this key sequence, MGCP phone will start in

production-test mode upon next restart.

TFTP upload: This is the key sequence the user should dial on the phone to start the

TFTP software update. After getting the new image, the phone will start itself using the

new image.

8.2.4. MCGP Configuration

Call Agent IP: It must be in dot-separated form. An illegal IP address won't be allowed

for this field. (Ex: 10.241.5.200).

Call Agent Port Number: This is the port at which the Call Agent receives and sends

packets.(Ex: 2427).

Gateway Port:

This is the port number at which the MGCP Phone will open the socket

to send and receive packets. (Ex: 2427).

Endpoint ID: This is the endpoint identifier as defined in rfc 2705

(endpointname@[IP

Address or domain name]). Here we can specify only the

endpoint name (up to @) or full identifier with either domain name or IP address. If

only the endpoint name (up to @) is given, the identifier will be formed

automatically by software by appending the IP address.

•

Example 1: If the endpoint name is "dlink/1" the identifier will be formed by

software by appending IP address like "dlink/1@[10.241.5.231].

Table of Contents