D-Link DPH-80 User Manual page 21

•
Example 2: If the full identifier is given as dlink/1@book. The IP address will
not be appended.
V
AD: When this is enabled, the MGCP phone uses silence compression to save on
bandwidth. This feature works irrespective of the codec selected.
Codec1, Codec2 and Codec3 are drop-down menus. This allows selecting what codecs
are to be used by the phone. It also specifies the priority of the codec while negotiating
for the codec to use in any call. Codec1 will be given the highest priority.
After entering the appropriate values, click Submit. The following page will appear.
Do not click Save and Restart until you have finished configuration.
20