2. Features
•
IP address assignment using DHCP (Dynamic Host Configuration Protocol),
PPPoE, or static configuration
•
Silence suppression and comfort noise generation that make the user feel
natural when connected
•
Adaptive jitter buffer for a smooth voice reception
•
DTMF tone generation
•
Lost packet recovery ability for improved voice quality
•
Adjustable speaker/ringer volume control
•
Remote software update support
•
Easy to install
•
One-touch dialing (Note: this feature is not a speakerphone. It allows you to
dial a number without using the handset. Once the party you are calling picks
up, you must use the handset to talk.)
•
Call hold
•
Last number redial
•
Mute
•
Call transfer
3. Technical Features
•
Call control protocols: H.323, SIP, MGCP
•
Voice compression: G.711 (A-Law/W-Law), G.723.1, G729A/AB
•
WAN connection: through 10/100 Mpbs Fast Ethernet port
•
H.450 Call transfer/Call on hold (for H.323)
4. Overview
The D-Link DPH-80 is a low cost, simple to use and extremely versatile IP phone with
the look and feel of a normal PSTN phone.
The D-Link IP Phone can operate under any of the three main Internet telephony
protocols: Media Gateway Control Protocol (MGCP); Session Initiation Protocol (SIP);
and the H.323 protocol. These protocols are used for signaling, maintaining, and tearing
down voice calls. The D-Link IP phone allows voice data to be carried over the same
path used by your computer for the Internet or Local Area Network (LAN).
The D-Link DPH-80 phone is easy to install and supports plug and play features of the
IP network. Out of the box, your IP phone will work in any of the above-mentioned
three protocol infrastructures with minimal configuration. Advanced, customized
configuration is easily achieved through a web-browser configuration utility.
D-Link IP phones support remote maintenance, allowing software to be upgraded
remotely for new features and any bug fixes. The DPH-80 supports a unique remote
diagnostic feature to monitor phone functions and performance.
9