Dph-70L Configuration - D-Link DPH-70L User Manual

7 DPH-70L Configuration

DPH-70L configuration menu helps you through the configuration process. You can enter the
configuration menu by pressing the 'MENU' key when DPH-70L is in idle state.
DPH-70L will ask for password on entering configuration menu. Since the configuration
information contains valuable information it is password protected. If you don't remember your
password, you can reset DPH-70L to default password as described in Loading factory defaults.
The default password is '12345'.
Warning:
DPH-70L identifies end of a parameter by 'ENTER' key. Please terminate each
parameter entry into DPH-70L by pressing 'ENTER' key.
DPH-70L configuration menu is shown below. Each of the different options in the menu is
described below. DPH-70L displays the current value of each parameter and allows you to edit it.
After password verification, DPH-70L displays the different options in main menu. You can
browse through the menu using the arrow keys on the phone. As you browse through the menu,
the cursor will indicate the currently chosen option. To select the menu option, you can either
press 'ENTER' key when cursor is at that option or you can directly press the number written
along with the option (as shown in figure below). You can press 'CANCEL' key to come out of any
menu and go to the previous menu.
Note:
If power goes off while you are configuring, the phone will work with the previous saved
parameters.
If you idle more than 90 seconds, dph-70 will accept the keys entered and go to next
state.
If you leave the phone without completing the configuration it will go back to idle state
without saving the parameters.
DPH-70L User's Guide
16