D-Link DPH-80 User Manual page 18

Hide thumbs Also See for DPH-80:
Table of Contents

Advertisement

Country Code: This is a drop-down menu. Select the appropriate country. This field
controls the type of tones played by MGCP phone.
Obtain IP address using:
static
If
option is selected, then a user-configured IP address, Net Mask, Default
gateway, and DNS server address would be used for the phone.
DHCP
If
is selected, then these values will be obtained using DHCP.
If the PPPoE is selected, and using the PPP username and password for
authentication, PPPoE obtains an IP address for the phone. Default selection is
Static-enabled.
PPP user name:
This is the user name used for PPP authentication with the PPP server
while obtaining an IP address via PPPoE.
PPP passwo d:
r
This is the password used for PPP authentication with the PPP server
while obtaining an IP address via PPPoE.
Idle Timeout:
This is the time interval in seconds of session inactivity after which the
PPP session should be terminated. If this is set to 0, then the session will never be
terminated. This field is grayed out at the moment so that it can't be modified. This will
17

Advertisement

Table of Contents
loading

Table of Contents