Table of Contents
Advertisement
8.2.2. Configuration Main Page
Click on General Configuration. A new page containing information about your system
and the DPH-80 will appear.
8.2.3. General Configuration
Firmware Version : It shows the current firmware version of the IP phone. It is updated
whenever the MGCP phone software is updated. It cannot be modified.
Hardware Version: It shows the current hardware version of the IP phone. It cannot be
modified.
MAC Address: This shows the MAC address of the board in colon-separated hex form.
If it contains the default value ff:ff:ff:ff:ff:ff, it can be modified once to a non-default
value. Otherwise, it cannot be changed.
be changed again.
Once modified, it will be grayed out and canno
16
t
Advertisement
Table of Contents
Troubleshooting
