Starcom Systems Helios User's Manual Manual page 92

Helios Users Guide
Use this section to enter the unit Number and Name. In the Cellular
Number field, enter the number of the SIM card installed in the unit. In
the Unit Type list, select Helios. Use the Terminal list to select the type
of terminal connected to the unit.
Specify Vehicle Model and Vehicle Color. Choose the Icon which will
represent the unit.
No Activity Alert (Hours) – used to receive an alert when the unit has
stopped transmitting. The default value is 336 hours (2 weeks).
In the Users list, select the users you want to make the unit available for
and click Add. The users will be moved to the Available for list.
Use the Cellular Notification section to configure the cellular
notifications for different events.
Notify Address 1-4 – enter the cellular numbers you want to use to send
commands to the unit, or to receive notifications on when the events
occur.
Message – modify the notification message format.
Language – select the language in which you want to receive the
message.
Units (kph/mph) – select the measurement you want to receive the
speed data in.
Allow commands from any cellular number – select this if you want to
be able to send commands to the unit from any cellular phone, and not
only from the addresses specified above.
Allow status requests from any cellular number – select this if you
want to allow status requests from any cellular phone, and not only from
the addresses specified above.
For more information, see Appendix I – Cellular Phone Commands.
In the Available reasons list, select the reasons you want to receive an
alert for and click Add. The reasons will be moved to the Notify for list.
www.starcomgpsglobal.com 92