Starcom Systems Helios User's Manual Manual page 105

Helios Users Guide
Set the necessary Value. You can leave the Condition as "Changeable", later
you will be able to change it in the event itself. Select the necessary operand in
the Operand list, as follows:
And – when you create several events, this event and the following one will be
performed simultaneously.
And then – when you create several events, the following event will start only
after the first one is performed.
Transmit – the event will be transmitted.
End – ends an event. For example, you can create an output event, which after
it performs the necessary actions will simply end.
You can create a complex event type, which consists of several events.
When finished, click Apply. The new event type is saved.
To create a new event, click New in the Events section.
Enter the name of the event in the Name field. In the Units list, select the units
you want to include in the event and click Add. The units will be moved to the
Available for list.
www.starcomgpsglobal.com 105