Starcom Systems Helios User's Manual Manual page 50

Helios Users Guide
Silent Delay – the unit enters this state if triggered while in the Armed
state. In this state, only the blinkers are activated. After a predefined
period of time has elapsed in Silent Delay mode, the unit enters the
Alarm Triggered mode.
Alarm Triggered – the system activates the siren.
Idle -> Arm – time to wait between the moment the ignition is turned off, and
entering the arm state. If you do not want the unit to enter the arm state
automatically, select None.
Silent Delay -> Triggered – time to wait from the moment the alarm system
has detected a break-in (for example, the ignition was turned on while the unit
is armed), and until the siren is triggered. When using a keypad, or a Dallas
Key, this will give the driver enough time to disarm the vehicle.
Triggered -> Transmission – time to wait while sounding the siren until it will
be stopped and a transmission will be sent.
Maximum Garage Time – maximum time to stay in Garage mode. This setting
is useful to avoid forgetting to disable the Garage mode manually.
The following image illustrates the logic states interchange.
www.starcomgpsglobal.com 50