Starcom Systems Helios User's Manual Manual page 114

Helios Users Guide

Location – the GPS location of the unit, including:
Valid – the date and time of the last location transmission from the

unit
Speed – the last recorded speed of the unit

Mileage – the last recorded mileage of the unit

Location – the GPS coordinates of the last position of the unit

Heading – the vehicle moving direction

Altitude – the last altitude of the unit

IO – unit input and output information
Commands
 Request Status – requests the current status of the unit
Tracking – overrides the unit transmission rate settings and forces

the unit to transmit according to the specified interval.
Stop Tracking – stops the tracking command and returns the unit to

its regular transmission rate
Set Output – sends a command to the unit output: Siren On/Off,

Door Lock/Unlock, Gradual Stop On/Off, and Immobilizer Off.
Voice Call – initiates a voice call with the unit

Set Mileage – sets the specified mileage value in the unit

Logic State – changes the unit logic state

www.starcomgpsglobal.com 114