General Settings - Starcom Systems Helios User's Manual Manual

Helios Users Guide

General settings

This tab allows you to configure the way the unit will register and calculate the
distance traveled by the vehicle.
Mileage (kilometers) – current mileage displayed on the vehicle dashboard.
Fixing Factor (%) – a factor to use when calculating mileage by GPS. The
default value is 100%. If, for example, there is a constant offset of 25% below
the actual mileage, this value should be changed to 125%.
Mileage From – in this dropdown list, you can select the method to use for
mileage calculation: GPS or Odometer.
Odometer Counting – if you chose to use odometer for mileage calculation,
configure the following fields:
Current Value – number of kilometers as shown in odometer.
Pulses Per KM – odometer pulses per one kilometer.
For more information, see Appendix B – Configuring Mileage.
www.starcomgpsglobal.com 40