Table of Contents
Advertisement
Helios Users Guide
In Installer, go to Helios Parameters > Driver IDs and configure the codes in
the following way.
The first 3 code fields are reserved exclusively for the relay units (up to 3). If
you're using one relay unit, enter its number in the first field and enter 0000 in
the following two fields.
Code field number 4 and the remaining fields will be used for the driver codes,
which will be activated by using the keypad. In this case code 1234 will be
used on the keypad to close the relay and enable the vehicle ignition.
The relay code is indicated on the sticker. For example, the relay code in the
following image is A617.
www.starcomgpsglobal.com
153
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Helios and is the answer not in the manual?
Questions and answers