Table of Contents
Advertisement
10. Lower the seat.
Adjusting the Tracking
1. Disengage the PTO, move the motion control levers to
the neutral locked position and set the parking brake.
2. Move the throttle lever to the Slow position, stop the
engine, remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Loosen the bolts securing the control levers (Figure 74)
Figure 74
1. Control lever
2. Control lever post
4. Have someone push the control lever posts (not the
control levers) all the way forward into the maximum
speed position and hold them there.
5. Adjust the control levers so that they line up (Figure 75)
and tighten the bolts, securing the levers to the posts.
3. Bolts
43
Figure 75
Advertisement
Table of Contents
