Figure 48
1. High temperature shutdown—the engine temperature has
exceeded safe levels and the engine has been shut down.
Check the cooling system.
2. High temperature warning—the engine temperature is
approaching unsafe levels and the PTO has been shut
down. Check the cooling system.
3. Operator is in the seat
4. The PTO is On
5. The parking brake is not engaged
6. Controls are in Neutral
7. The SCM is receiving power and is operational
Positioning the Seat
Changing the Seat Position
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
1. To adjust, move the lever sideways to unlock the seat
(Figure 49).
G006855
1. Back rest knob
2. Seat suspension knob
2. Slide the seat to the desired position and release lever
to lock in position.
3. Verify that the seat has locked into place by attempting
to move it back and forth.
Changing the Seat Suspension
The seat can be adjusted to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
Without sitting on the seat, turn the knob in front either
direction to provide the best comfort (Figure 49).
1. Seat suspension knob
Changing the Back Position
The back of the seat can be adjusted to provide a comfortable
ride. Position the back of the seat where it is most
comfortable.
To adjust it, turn the knob, under the right-side arm rest, in
either direction to provide the best comfort (Figure 49).
26
1
2
3
4
Figure 49
3. Lumbar support
adjustment knob
4. Seat position adjustment
lever
Figure 50
2. Operator weight setting