Table of Contents
Advertisement
Figure 35
1. Pressure hose
27. Remove the cap and plug the cab wire harness
connector into the harness on the rear frame mount
(Figure 36).
Figure 36
1. Cab wire harness
connector
28. Start the machine. Run the lift arm up and down and
check for hydraulic leaks. Check the antifreeze level
and replenish as required.
2. Return hose
2. Harness connector on the
rear frame mount
Product Overview
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 37).
Tractor Control Panel
1. Ignition switch
2. Engine coolant
temperature warning
light
3. Glow plug light
4. Power take off (PTO)
Switch
Motion Control Levers
The motion control levers control the forward and rearward
motions as well as the turning of the machine.
Parking Brake Lever
Whenever the engine is shut off, engage the parking brake to
prevent accidental movement of the machine. To engage the
parking brake, pull the parking brake lever rearward and up
(Figure 38). To release the parking brake, push the parking
brake lever forward and down.
19
Figure 37
5. Oil pressure warning light
6. Charge indicator light
7. Throttle lever
8. Hour meter
Advertisement
Table of Contents
