Dual display installation
Installation of dual display combiner is similar to a single display
with the following changes:
1. Displays must be either 1920 x 1080 or 1920 x 1200 native
resolution for DVI units (SC42DU-3) or 3840x2160 for
SC42PU-3 and SC42HU-3. Do not use higher resolution as
the image will be shown as a smaller window or will be
rescaled (resulting a degradation in the displayed video
quality.
2. It is recommended that both displays will be identical type
and model.
3. Displays should be oriented in landscape.
4. Left side display must be connected to the primary console
display output jack (the right side jack when looking from
the rear).
5. Conversion to VGA monitor is not supported.
26
Section 4 - Operation
2/4 Ports Secure KVM Combiner User Manual